Zytel® 70G35HSRX BK099

NYLON RESIN

PA66-GF35

CHARACTERISTICS

Regional availability

• North America

• Europe

• Asia Pacific

• South and Central America

• Near East/Africa

• Global

Processing

Injection Moulding

Delivery form

Pellets

Additives

Release agent

Special characteristics

Heat stabilised or stable to heat, Hydrolysis resistant

PRODUCT TEXT

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.

The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

Zytel® 70G35HSRX BK099 a 35% glass reinforced, heat stabilised, hydrolysis resistant polyamide 66 for injection moulding. Developed for applications designed for direct overmolding of gaskets onto thermoplastic parts. Previously coded FE270056 BK099.

PRODUCT INFORMATION

DRY/COND.

TEST NORM

Resin Identification

PA66-GF35

ISO 1043

Part Marking Code

>PA66-GF35<

ISO 11469

ISO designation

ISO 16396-PA66,GF35,M1CGHRW,S14-120

-

RHEOLOGICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Viscosity number

145/*

cm3/g

ISO 307, 1157, 1628

Moulding shrinkage, parallel

0.4/-

%

ISO 294-4, 2577

Moulding shrinkage, normal

1.1/-

%

ISO 294-4, 2577

MECHANICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Tensile Modulus

12000/9000

MPa

ISO 527-1/-2

Stress at break

215/140

MPa

ISO 527-1/-2

Strain at break

3.2/5

%

ISO 527-1/-2

Tensile creep modulus, 1h

*/8500

MPa

ISO 899-1

Tensile creep modulus, 1000h

*/6500

MPa

ISO 899-1

Charpy impact strength, 23°C

85/100

kJ/m2

ISO 179/1eU

Charpy impact strength, -30°C

80/70

kJ/m2

ISO 179/1eU

Charpy notched impact strength, 23°C

13/18

kJ/m2

ISO 179/1eA

Charpy notched impact strength, -30°C

10/10

kJ/m2

ISO 179/1eA

Puncture energy, 23°C

6/-

J

ISO 6603-2

Izod notched impact strength, 23°C

12/15

kJ/m2

ISO 180/1A

Ball indentation hardness, H 961/30

285/-

MPa

ISO 2039-1

Poisson's ratio

0.33/0.34

-

-

THERMAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Melting temperature, 10°C/min

261/*

°C

ISO 11357-1/-3

Glass transition temperature, 10°C/min

70/20

°C

ISO 11357-1/-2

Temp. of deflection under load, 1.8 MPa

247/*

°C

ISO 75-1/-2

Temp. of deflection under load, 0.45 MPa

260/*

°C

ISO 75-1/-2

Coeff. of linear therm. expansion, parallel

17/*

E-6/K

ISO 11359-1/-2

Coeff. of linear therm. expansion, normal

85/*

E-6/K

ISO 11359-1/-2

Thermal conductivity of melt

0.24

W/(m K)

-

Spec. heat capacity of melt

2130

J/(kg K)

-

PA66产品型号

杜邦PA66 101F       通用级      

杜邦PA66 101L       通用级

杜邦PA66 FR15       纯树脂 防火V0     

杜邦PA66 FR7025V0   纯树脂  防火V0

杜邦PA66 FR50     玻璃纤维增强25% 防火V0        

杜邦PA66 408HS    热稳定         

杜邦PA66  103HSL    热稳定 

杜邦PA66  8018HS    玻璃纤维增强14% 超韧 耐热

杜邦PA66 8018     玻璃纤维增强14% 超韧       

杜邦PA66 408L     超高抗冲击     

杜邦PA66 80G33L   玻璃纤维增强33% 超韧 耐冲  

杜邦PA66 FE5171   玻璃纤维增强33% FDA        

杜邦PA66 ST801    超韧耐寒耐冲   

杜邦PA66 132F 35L 纯树脂高抗冲   

杜邦PA66 70G33L   玻璃纤维增强33% 高强度 高刚性               

杜邦PA66 70G25L   玻璃纤维增强25% 高强度 高刚性

杜邦PA66 70G13L   玻璃纤维增强13%             

杜邦PA66 70G50L   玻璃纤维增强50% 高强度 高刚性                

杜邦PA66 70G43L   玻璃纤维增强43% 高强度 高刚性

杜邦PA66 71G33L   玻璃纤维增强33% 耐冲击

杜邦PA66 74G33J   玻璃纤维增强30% 高强度 高刚性 表面改良      

杜邦PA66 3426     高透明

巴斯夫PA66 A3K    易流动 快速注射级 用于高应力工程制件         

巴斯夫PA66 A3EG3  玻璃纤维增强15% 用于中等刚性的机械部件和护罩    

巴斯夫PA66 A3EG6  玻璃纤维增强30% 用于需要高刚性和尺寸稳定性的机械部件护罩     

巴斯夫PA66 A3EG7  玻璃纤维增强35% 用于需要高刚性和尺寸稳定性的机械部件护罩           

巴斯夫PA66 A3EG10 玻璃纤维增强50% 用于需要高钢性的工业部件     

巴斯夫PA66 A3X2G5 玻璃纤维增强25% 红磷无卤阻燃V0       

巴斯夫PA66 A3X2G7 玻璃纤维增强35% 红磷无卤阻燃V0        

巴斯夫PA66 C3U    高韧性 无卤无磷阻燃V0 用于电绝缘部件

巴斯夫PA66 A3Z    超韧抗冲击 适用于具有良好耐低温冲击，耐热变形的原件和外壳。

罗地亚PA66 A205F     高流动 

罗地亚PA66 B50H1     无卤阻燃V0      

罗地亚PA66 A246M     超韧耐寒           

首诺PA66 21SPC      V2 通用            

旭化成PA66 1300S    用于接插件 线圈轴心 电缆材料

东丽PA66 CM3001       一般级          

东丽PA66 CM3004-V0    无卤防火VO        

东丽PA66 CM3004G-15   玻璃纤维增强15% 防火V0              

东丽PA66 CM3004G-30   玻璃纤维增强30% 防火V0           

东丽PA66 CM3006       一般级        

东丽PA66 CM3006G-15   玻璃纤维增强15%                

东丽PA66 CM3006G-30   玻璃纤维增强30%