Zytel® 101 NC010

NYLON RESIN

PA66

CHARACTERISTICS

Processing

Injection Moulding

Delivery form

Pellets

PRODUCT TEXT

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.

The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

Zytel® 101 NC010 is a general purpose polyamide 66 resin for injection moulding and extrusion.

PRODUCT INFORMATION

DRY/COND.

TEST NORM

Resin Identification

PA66

ISO 1043

Part Marking Code

>PA66<

ISO 11469

ISO designation

ISO 16396-PA66,,M1G1N,S14-030

-

RHEOLOGICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Viscosity number

150/*1

cm3/g

ISO 307, 1157, 1628

Moulding shrinkage, parallel

1.4/-

%

ISO 294-4, 2577

Moulding shrinkage, normal

1.4/-

%

ISO 294-4, 2577

1: Sulfuric acid 96%

MECHANICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Tensile Modulus

3100/1400

MPa

ISO 527-1/-2

Yield stress

82/55

MPa

ISO 527-1/-2

Yield strain

4.5/25

%

ISO 527-1/-2

Nominal strain at break

25/>50

%

ISO 527-1/-2

Strain at break, 50mm/min

45/-

%

ISO 527-1/-2

Flexural Modulus

2800/1200

MPa

ISO 178

Flexural Strength

90/54

MPa

ISO 178

Tensile creep modulus, 1h

*/1200

MPa

ISO 899-1

Tensile creep modulus, 1000h

*/700

MPa

ISO 899-1

Charpy impact strength, 23°C

N/N

kJ/m2

ISO 179/1eU

Charpy impact strength, -30°C

400/N

kJ/m2

ISO 179/1eU

Charpy notched impact strength, 23°C

5.5/15

kJ/m2

ISO 179/1eA

Charpy notched impact strength, -30°C

4.5/3

kJ/m2

ISO 179/1eA

Izod notched impact strength, 23°C

5.5/12

kJ/m2

ISO 180/1A

Izod notched impact strength, -30°C

5.5/-

kJ/m2

ISO 180/1A

Izod notched impact strength, -40°C

5.5/-

kJ/m2

ISO 180/1A

Izod impact strength, 23°C

N/N

kJ/m2

ISO 180/1U

Izod impact strength, -30°C

300/-

kJ/m2

ISO 180/1U

Hardness, Rockwell, M-scale

79/59

-

ISO 2039-2

Hardness, Rockwell, R-scale

121/108

-

ISO 2039-2

Ball indentation hardness, H 358/30

180/85

MPa

ISO 2039-1

Ball indentation hardness, H 961/30

160/*

MPa

ISO 2039-1

Poisson's ratio

0.37/0.43

-

-

Abrasion resistance

6/*

mm3

ISO 4649

TRIBOLOGICAL PROPERTIES

DRY/COND.

TEST NORM

Coefficient of static friction, against steel

-/0.2

ASTM 1894

Coefficient of sliding friction, 1h against steel

-/0.28

ASTM 1894