Minlon® 12T NC010

MINERAL REINFORCED NYLON RESIN

PA66-I-MD36

CHARACTERISTICS

Regional availability

• North America

• South and Central America

Processing

Injection Moulding

Delivery form

Pellets

Special characteristics

Heat stabilised or stable to heat

PRODUCT TEXT

Common features of Minlon® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness /toughness, good high temperature performance, good chemical resistance, paintability, dimensional stability and low warpage.

Grades with improved electrical and flammability properties are available within the Zytel® nylon resin product line. In addition, Minlon® nylon resin is available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses.

The good melt stability of Minlon® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Minlon® nylon resin typically is used in demanding applications in the automotive, electrical, electronic, domestic appliances and construction industries.

Minlon® 12T NC010 is a 36% mineral reinforced, toughened, heat stabilised, black polyamide 66 resin for injection moulding.

PRODUCT INFORMATION

DRY/COND.

TEST NORM

Resin Identification

PA66-IMD36

ISO 1043

Part Marking Code

>PA66-IMD36<

ISO 11469

ISO designation

ISO 16396-PA66-I,MD36,M1GHN,S14-050

-

RHEOLOGICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Moulding shrinkage, parallel

0.9/-

%

ISO 294-4, 2577

Moulding shrinkage, normal

0.9/-

%

ISO 294-4, 2577

MECHANICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Tensile Modulus

4900/2000

MPa

ISO 527-1/-2

Stress at break

80/58

MPa

ISO 527-1/-2

Strain at break

18/40

%

ISO 527-1/-2

Flexural Modulus

4500/1800

MPa

ISO 178

Charpy impact strength, 23°C

210/330

kJ/m2

ISO 179/1eU

Charpy impact strength, -30°C

90/120

kJ/m2

ISO 179/1eU

Charpy notched impact strength, 23°C

9/15

kJ/m2

ISO 179/1eA

Charpy notched impact strength, -30°C

5/4

kJ/m2

ISO 179/1eA

Charpy notched impact strength, -40°C

4/3

kJ/m2

ISO 179/1eA

Izod notched impact strength, 23°C

9/13

kJ/m2

ISO 180/1A

Izod notched impact strength, -30°C

6/6

kJ/m2

ISO 180/1A

Izod notched impact strength, -40°C

5/5

kJ/m2

ISO 180/1A

Izod impact strength, 23°C

190/330

kJ/m2

ISO 180/1U

Izod impact strength, -30°C

90/100

kJ/m2

ISO 180/1U

Poisson's ratio

0.35/0.4

-

-

THERMAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Melting temperature, 10°C/min

256/*

°C

ISO 11357-1/-3

Temp. of deflection under load, 1.8 MPa

80/*

°C

ISO 75-1/-2

Temp. of deflection under load, 0.45 MPa

205/*

°C

ISO 75-1/-2

Coeff. of linear therm. expansion, parallel

64/*

E-6/K

ISO 11359-1/-2

Coeff. of linear therm. expansion, normal

65/*

E-6/K

ISO 11359-1/-2

RTI, electrical, 0.75mm

65

°C

UL 746B

RTI, electrical, 1.5mm

65

°C

UL 746B

RTI, electrical, 3mm

65

°C

UL 746B

RTI, impact, 0.75mm

65

°C

UL 746B

RTI, impact, 1.5mm

65

°C

UL 746B

RTI, impact, 3mm

65

°C

UL 746B

RTI, strength, 0.75mm

65

°C

UL 746B

RTI, strength, 1.5mm

65/*

°C

UL 746B

RTI, strength, 3mm

65

°C

UL 746B

FLAMMABILITY

DRY/COND.

UNIT

TEST NORM

Burning Behav. at 1.5mm nom. thickn.

HB/*

class

IEC 60695-11-10

Thickness tested

1.5/*

mm

IEC 60695-11-10

UL recognition

yes/*

-

UL 94

Burning Behav. at thickness h

HB/*

class

IEC 60695-11-10

Thickness tested

0.81/*

mm

IEC 60695-11-10

UL recognition

yes/*

-

UL 94

Oxygen index

25/*

%

ISO 4589-1/-2

FMVSS Class

B

-

ISO 3795 (FMVSS 302)

Burning rate, Thickness 1 mm

<80

mm/min

ISO 3795 (FMVSS 302)

ELECTRICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Relative permittivity, 100Hz

4/-

-

IEC 62631-2-1

Relative permittivity, 1MHz

3.8/-

-

IEC 62631-2-1

Dissipation factor, 100Hz

100/-

E-4

IEC 62631-2-1

Dissipation factor, 1MHz

100/-

E-4

IEC 62631-2-1

Volume resistivity

1E11/-

Ohm*m

IEC 62631-3-1

Electric strength

24/-

kV/mm

IEC 60243-1

Comparative tracking index

400/-

-

IEC 60112

Electric Strength, Short Time, 2mm

24/-

kV/mm

IEC 60243-1

OTHER PROPERTIES

DRY/COND.

UNIT

TEST NORM

Humidity absorption, 2mm

1.7/*

%

Sim. to ISO 62

Water absorption, 2mm

6.2/*

%

Sim. to ISO 62

Density

1410/-

kg/m3

ISO 1183

Water Absorption, Immersion 24h

1.2/*

%

Sim. to ISO 62

INJECTION