全国咨询热线：13431131945
|
| 品牌 | 基础创新 |
| 货号 | LG9000 |
| 用途 | 注塑级 |
| 牌号 | LG9000 |
| 型号 | LG9000 |
| 品名 | PC合金料 |
| 外形尺寸 | 颗粒 |
| 生产企业 | 基础创新 |
| 是否进口 | 是 |
注塑模工艺条件
干燥处理:加工前的干燥处理是必须的。湿度应小于0.04%，建议干燥条件为90~110C，2~4小时。
注射速度:尽可能地高。
化学和物理特性: PC/ABS具有PC和ABS两者的综合特性。例如ABS的易加工特性和PC的优良机械特性和热稳定性。二者的比率将影响PC/ABS材料的热稳定性。PC/ABS这种混合材料还显示了优异的流动特性。收缩率在0.5%左右。
特点
PC/ABS是一种通过混炼后合成的改性工程塑料。其中，PC就是聚碳酸脂，ABS就是丙烯腈(A)、丁二烯(B)和苯乙 烯(S)的共聚物。这种改性塑料比单纯的PC和ABS性能更好，例如:抗冲击性提高，耐热性提高，硬度提高等等。
GE PC/ABS C2950 防火V0 耐高温 抗撞击性，良好良好的流动性耐热性，中等无溴阻燃性
GE PC/ABS C2800 防火V0 高流动
GE PC/ABS C1200 耐高温 抗冲击
GE PC/ABS C1110 高冲击 高流动
GE PC/ABS C6200 防火V0 紫外线稳定 抗冲击 流动性好
GE PC/ABS LG9000 低光泽度 紫外线稳定 高流动
GE PC/ABS C6600 紫外线稳定
GE PC/ABS MC1300 优异的流动性和抗冲击性能，电镀应用
GE PC/ABS MC8002 低粘度 高抗冲击性 高延性
GE PC/ABS MC5220 玻璃纤维20%增强 防火V0
供应拜耳PC/ABS T65 低温抗冲击
供应拜耳PC/ABS T85 耐蠕变 尺寸稳定性好 耐低温冲击性好 适合微型电话机壳 电磁电容器壳体
供应拜耳PC/ABS T45 电镀用 适合于汽车工业、仪器仪表、电器的特种工程制品
供应拜耳PC/ABS DP3008 高抗冲击
| Physical | Nominal Value | Unit | Test Method |
Density / Specific Gravity | 1.13 | g/cm3 | ASTM D792 |
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 17 | g/10 min | ASTM D1238 |
Molding Shrinkage | Internal Method | ||
Across Flow : 3.20 mm | 0.50 to 0.70 | % | |
Flow : 3.20 mm | 0.50 to 0.70 | % | |
Water Absorption | ASTM D570 | ||
24 hr | 0.10 | % | |
Equilibrium, 23°C | 0.40 | % | |
| Hardness | Nominal Value | Unit | Test Method |
Rockwell Hardness (R-Scale) | 118 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength 2 (Yield) | 54.0 | MPa | ASTM D638 |
Tensile Elongation 2 (Break) | 75 | % | ASTM D638 |
Flexural Modulus 3 (50.0 mm Span) | 2300 | MPa | ASTM D790 |
Flexural Strength 3 (Yield, 50.0 mm Span) | 84.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact | ASTM D256 | ||
-30°C | 320 | J/m | |
23°C | 530 | J/m | |
Instrumented Dart Impact | ASTM D3763 | ||
-30°C, Total Energy | 33.0 | J | |
23°C, Total Energy | 40.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load | ASTM D648 | ||
0.45 MPa, Unannealed, 3.20 mm | 123 | °C | |
0.45 MPa, Unannealed, 6.40 mm | 129 | °C | |
1.8 MPa, Unannealed, 3.20 mm | 107 | °C | |
1.8 MPa, Unannealed, 6.40 mm | 110 | °C | |
Vicat Softening Temperature | 129 | °C | ASTM D1525 4 |
CLTE | ASTM E831 | ||
Flow : -20 to 150°C | 7.2E-5 | cm/cm/°C | |
Transverse : -20 to 150°C | 7.2E-5 | cm/cm/°C | |
Thermal Conductivity | 0.20 | W/m/K | ASTM C177 |
RTI Elec | 60.0 | °C | UL 746 |
RTI Imp | 60.0 | °C | UL 746 |
RTI Str | 60.0 | °C | UL 746 |
| Electrical | Nominal Value | Test Method | |
Arc Resistance 5 | PLC 6 | ASTM D495 | |
Comparative Tracking Index (CTI) | PLC 2 | UL 746 | |
High Amp Arc Ignition (HAI) 6 | PLC 0 | UL 746 | |
Hot-wire Ignition (HWI) | PLC 2 | UL 746 | |
| Flammability | Nominal Value | Test Method | |
Flame Rating (1.5 mm) | HB | UL 94 |
| Optical | Nominal Value | Test Method | |
Gloss (60°, Untextured) | 30 | ASTM D523 |
| Injection | Nominal Value | Unit | |
Drying Temperature | 105 to 110 | °C | |
Drying Time | 3.0 to 4.0 | hr | |
Suggested Max Moisture | 0.040 | % | |
Suggested Shot Size | 30 to 80 | % | |
Rear Temperature | 250 to 290 | °C | |
Middle Temperature | 255 to 295 | °C | |
Front Temperature | 260 to 300 | °C | |
Nozzle Temperature | 275 to 300 | °C | |
Processing (Melt) Temp | 275 to 300 | °C | |
Mold Temperature | 60 to 90 | °C | |
Back Pressure | 0.300 to 0.700 | MPa | |
Screw Speed | 40 to 70 | rpm | |
Vent Depth | 0.038 to 0.076 | mm |
