FDA食品级POMFG900P免费试机-东莞市广裕塑胶原料有限公司

产品展厅

您当前的位置：网站首页 > 产品展厅 >POM塑胶原料 >FDA食品级POMFG900P免费试机

FDA食品级POMFG900P免费试机

起订量 (千克)价格

25-1000￥31 /千克

1000-5000￥30 /千克

≥5000￥28 /千克

品牌：美国杜邦

货号：FG900P

发布日期： 2020-06-14
更新日期： 2025-05-29

发送咨询信息

产品详请

品牌	美国杜邦
货号	FG900P
用途	注塑级
牌号	FG900P
型号	FG900P
品名	POM
外形尺寸	颗粒
生产企业	美国杜邦
是否进口	是

Material Status	Commercial: Active
Literature 1	Processing - Injection Molding (English) Typical Processing for DuPont Engineering Polymers (English) White Paper - Property Advantages of Delrin® Acetal Homopolymer - a guide for design engineers (English)
UL Yellow Card 2	E41938-100907458
Search for UL Yellow Card	DuPont Transportation & Industrial Delrin®
Availability	Africa & Middle EastAsia PacificEuropeLatin AmericaNorth America
Additive	LubricantMold Release
Features	Food Contact AcceptableHomopolymerLow Viscosity
Uses	Non-specific Food Applications
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Shear Modulus vs. Temperature, Dynamic (ISO 11403-1) Shear Stress vs. Shear Rate (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)
Part Marking Code (ISO 11469)	>POM<
Resin ID (ISO 1043)	POM

Physical	Nominal Value	Unit	Test Method
Density	1.42	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	25	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)	21	cm3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.9	%
Flow	1.9	%
Water Absorption			ISO 62
Saturation, 23°C, 2.00 mm	1.4	%
Equilibrium, 23°C, 2.00 mm, 50% RH	0.40	%
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness			ISO 2039-2
M-Scale	92
R-Scale	120

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3300	MPa	ISO 527-2
Tensile Stress (Yield)	71.0	MPa	ISO 527-2
Tensile Strain (Yield)	12	%	ISO 527-2
Nominal Tensile Strain at Break	23	%	ISO 527-2
Tensile Creep Modulus			ISO 899-1
1 hr	2800	MPa
1000 hr	1500	MPa
Flexural Modulus	3000	MPa	ISO 178
Poisson's Ratio	0.37
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-30°C	7.0	kJ/m2
23°C	8.0	kJ/m2
Charpy Unnotched Impact Strength			ISO 179/1eU
-30°C	200	kJ/m2
23°C	200	kJ/m2
Notched Izod Impact Strength			ISO 180/1A
-40°C	8.0	kJ/m2
23°C	7.0	kJ/m2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, Unannealed	162	°C	ISO 75-2/B
1.8 MPa, Unannealed	94.0	°C	ISO 75-2/A
Vicat Softening Temperature	160	°C	ISO 306/B50
Melting Temperature 3	178	°C	ISO 11357-3
CLTE			ISO 11359-2
Flow	1.2E-4	cm/cm/°C
Transverse	1.2E-4	cm/cm/°C
Annealing Temperature	160	°C
Annealing Time - Optional	30.0	min/mm

Electrical	Nominal Value	Unit	Test Method
Hot-wire Ignition (HWI) (0.750 mm)	8.0	sec	UL 746
Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94, IEC 60695-11-10, -20
0.8 mm	HB
1.5 mm	HB

Additional Information	Nominal Value	Unit	Test Method
Emission	< 8.00	mg/kg	VDA 275
Fogging			ISO 6452
F-value (refraction)	95	%
G-value (condensate)	0.20	mg

Injection	Nominal Value	Unit
Drying Temperature	80	°C
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Suggested Max Moisture	0.20	%
Processing (Melt) Temp	210 to 220	°C
Melt Temperature, Optimum	215	°C
Mold Temperature	80 to 100	°C
Mold Temperature, Optimum	90	°C
Holding Pressure	80.0 to 100	MPa
Drying Recommended	yes
Hold Pressure Time	8.00	s/mm

Notes

1These links provide you with access to supplier literature. We work hard to keep them up to date; however you may find the most current literature from the supplier.

2A UL Yellow Card contains UL-verified flammability and electrical characteristics. UL Prospector continually works to link Yellow Cards to individual plastic materials in Prospector, however this list may not include all of the appropriate links. It is important that you verify the association between these Yellow Cards and the plastic material found in Prospector. For a complete listing of Yellow Cards, visit the UL Yellow Card Search.

310°C/min