全国咨询热线：13431131945
|
| 特性级别 | 标准级||| |
| 牌号 | 101f |
| 加工级别 | 注塑级||| |
| 品名 | Zytel 101F NC010 |
| 厂家(产地) | 杜邦 |
| 用途级别 | 通用级|||食品级|||电子电器部件|||运动器材||| |
PA具有优良的力学性能、耐摩擦性、耐热，优异的电绝缘性
应用：PA广泛应用于汽车工业、电器电子工业、交通运输业、机械制造业
、电线电缆通讯业、薄膜及日用品
杜邦PA66Zytel 101F NC010物性表：
| Physical | Dry | Conditioned | Unit | Test Method |
Density | 1.14 | -- | g/cm3 | ISO 1183 |
Molding Shrinkage | ISO 294-4 | |||
Across Flow | 1.4 | -- | % | |
Across Flow : 80°C, 48 hr | 0.10 | -- | % | |
Flow | 1.4 | -- | % | |
Flow : 80°C, 48 hr | 0.20 | -- | % | |
Water Absorption | ISO 62 | |||
Saturation, 23°C, 2.00 mm | 8.5 | -- | % | |
Equilibrium, 23°C, 2.00 mm, 50% RH | 2.6 | -- | % | |
Viscosity Number | 150 | -- | cm3/g | ISO 307 |
| Electrical | Dry | Conditioned | Unit | Test Method |
Volume Resistivity | 1.0E+13 | > 1.0E+13 | ohms·m | IEC 62631-3-1 |
Electric Strength | 32 | 26 | kV/mm | IEC 60243-1 |
Relative Permittivity | IEC 62631-2-1 | |||
1 MHz | 3.60 | 4.60 | ||
100 Hz | 3.80 | 8.00 | ||
Dissipation Factor | IEC 62631-2-1 | |||
100 Hz | 0.014 | -- | ||
1 MHz | 0.018 | 0.10 | ||
| Flammability | Dry | Conditioned | Unit | Test Method |
Flame Rating | UL 94, IEC 60695-11-10, -20 | |||
0.71 mm | V-2 | -- | ||
1.5 mm | V-2 | -- | ||
Oxygen Index | 28 | -- | % | ISO 4589-2 |
FMVSS Flammability | SE | -- | FMVSS 302 | |
Fogging - G-value (condensate) | 1.0E-4 | -- | g | ISO 6452 |
| Fill Analysis | Dry | Conditioned | Unit | Test Method |
Melt Density | 0.970 | -- | g/cm3 | |
Ejection Temperature | 190 | -- | °C | |
Specific Heat Capacity of Melt | 2790 | -- | J/kg/°C | |
Thermal Conductivity of Melt | 0.16 | -- | W/m/K | |
| Additional Information | Dry | Conditioned | Unit | Test Method |
Emission of Organic Compounds | 6.50 | -- | μgC/g | VDA 277 |
Odor | 3.00 | -- | VDA 270 |
| Injection | Dry | Unit | |
Drying Temperature | 80 | °C | |
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | |
Suggested Max Moisture | 0.20 | % | |
Processing (Melt) Temp | 280 to 300 | °C | |
Melt Temperature, Optimum | 290 | °C | |
Mold Temperature | 50 to 90 | °C | |
Mold Temperature, Optimum | 70 | °C | |
Holding Pressure | 50.0 to 100 | MPa | |
Drying Recommended | yes | ||
Hold Pressure Time | 4.00 | s/mm | |
Maximum Screw Tangential Speed | 24 | m/min |
